请教一下，ORCAD 10.3要如何 ..

访客只能看到部份内容，免费 加入会员 或由脸书 Google 可以看到全部内容

我不知道，只是依通常的状况回答.....

你有破解档了？里面有些什么档案？
txt或nfo档中就可能有说明.....
如果只有个档名是cr(ack)什么的，那可能是COPY到安装目录或直接执行.....
如果档名在安装目录下找得到，那就把原来的那个档备份起来，然后把破解档中的那个放到安装目录中.....

破解说明如下：(但就是试不成功)

Directly install Cadence products without installing network license server
don't bother about missing control files, and missing license.dat during installation, you gonna
intall them later on


Orcad Product explains ( only high levels ... ):

PO1110 OrCAD Capture CIS                    ( Schematics + Database support )
PO1120 OrCAD Capture CIS Option                  ( SOme options for Capture CIS )
PO1332 PSpice Adv Analysis                  ( Optimisation module for PSpice )
PO1420 OrCAD Layout PLUS                  ( PCB Design )
PO1600 speCCtra 6U for OrCAD                  ( speCCtra autorouter 6 layers, unlimited comps ) )

PO1530 OrCAD Unison Ultra                  ( Some low level Bundle )
PO3030 OrCAD PCB Designer with PSpice            ( Some low level Bundle )

no need to install any other products, they are crippled version of above one ;D

After the installation is finished, just copy our .dat license fiels to C:\Flexlm
and don't forget to set two environment variables ( LM_LICENSE_FILE and CDS_LIC_FILE ) to point
our license file ( value C:\Flexlm\cadence_orcad_103.dat )

Enjoy

Special notes : Orcad products using several servers which might cause some issue without proper
          firewall settings, ie Zone Alarm does askind to allow execution of 3 .exe files
          the fact to refuse will hand capture for example. The ain't related to any outgoing
          "call home" stuff, no problem

直接安装时不要安装"network license server".....
.....
OK后，copy"our .dat"至 C:\Flexlm，并设定两变数指向C:\Flexlm\cadence_orcad_103.dat.....

有点像某知名3D工程软体的破解.....
直接安装OK后，注意一下是否有啥程式已经启动了（用工作管理员... 处理程序... 结束之.....），再执行破解.....
只能想到这样.....

因为它们每次执行都要去指定 license.dat 授权档的位置～有点麻烦 :P
所以建议安装前就先将 crack 目录下的 license.dat 档拷贝至 C:\flexlm 目录下摆放 ^^
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Orcad 10 安装细节:
ISO里的 Crack 资料夹,有 license.dat 档
用记事本打开此档
第一行 flexlmhostname
改成 你的电脑名称[在(我的电脑)按右键 按(电脑名称)的 (完整电脑名称)] 不加句点(.)
改完之后,存在你的硬碟里
开始安装程式
1.先选第一个选项 license Setup
进入之后 在第二输入行 选择你刚刚改完的 license.dat
按Next 有错不管他
再一个错 选否 取消安装
2.重新执行CD里 Setup.exe 档
又开始执行安装程式
按第2个选项 Install Program
进入之后
*下方有2个空白
*第一个 空白填 5280
*第二个 空白填 你的(完整电脑名称)
填完 按NEXT
*填入名子
ANY.
*填入公司名称
(随便打)
之后
就看你要不要安装
全部的程式了
开始复制之前 会有一个错 不用管他

可以试一试下列步骤：

1. 先建立安装目录 C:\OrCAD\Crack。
2. 再将光碟中的档案 Crack\cadence_orcad_103.dat 复制到 C:\OrCAD\Crack 中。
3. 设定环境变数 CDS_LIC_FILE = C:\OrCAD\Crack\cadence_orcad_103.dat
                          LM_LICENSE_FILE = C:\OrCAD\Crack\cadence_orcad_103.dat
4. 在建立环境变数后，要从新开机。
5. 执行 Setup.exe 程式。
6. 直接选择 Install Products，不要选择 Set Up Licensing。
7. License Manager Communication 中的内容不要设定，按 Next。
8. Select Products 中选所需安装的程式。

祝好运了哦！

不知10.5也可不可这样子破解...

***************************************************************************
    Cadence OrCAD 10 Instalation Notes

1- Run MakeLic to make a node locked license or MakeFloatLic for a floating one...
  I really recomend using the nodelocked, so you will not have to set services.
  Or you may just use the attached ones.
 
2- It will create the required license.dat file to enable ALL cadence products
  and open it on notepad. Save it to a place you will remember. If you already
  use the c:\flexlm folder save it there as ORCAD.DAT or other folder you normally
  save your licenses. You may also append to your current LICENSE.DAT, but remember
  to strip out the server and daemon lines, you dont need them, just for setup.
 
3- A copy of this license will be also saved as C:\INSTALLINFO.TXT

4- Now run the setup.exe from the Orcad CD.

5- Skip step 1 and go straight to install software.

6- When asked about the INSTALLINFO.TXT, point to the one saved in your c:\
  Leave port and server info as they are for now...
 
7- Install the products you need/want.

8- After installing, go to the folder you installed Orcad and open the compnts.dat file
  Now, replace the SERVER1=27001@yorservername by the full path to the saved license
  file, example:SERVER1=C:\CAD\SECURITY\LICENSES\OrCAD.DAT
 
9- Enjoy

*****************************************************************************

有人能帮我看看这些是什么意思嘛??

希望能破的了   谢谢分享

谢谢楼主