用途：可以讓一個Device跑多個任務。只支援2000&XP...適用雙CPU或有支援超執行緒(HT)的CPU
作者網頁：http://blakenyc77.tripod.com/udtweaker.html
原文：
This neat program lets you do four main things:
1.It lets you "cache" multiple workunits ahead of time, which is a feature that is similar to that already offered by UD Monitor, but I feel that my program implements it better, because it does not require multiple copies of the Agent. The Agent will still try to connect to the server after every workunit is finished, but even if your network is down, the Agent will still be able to continue working on the background.
2.Multiple-processor support. If you are running Windows 2000 and have more than one processor, then you can use this feature to let the Agent run up to two workunits simultaneously. Note that this feature will not work on Windows95 or Windows 98 or Windows Me because they do not support multiple processors. This feature works by tricking the Agent into running two copies of the LigandFit program at once, each with a different workunit. Please note that the Agent will still only display the progress and graphics from one of the LigandFits, but there are actually TWO running. Also remember that this only supports up to two processors only.
3.Disable automatic snooze-mode for laptops. The Agent automatically goes into smooze mode when your power goes unplugged, because it lets your battery last longer. Also, laptop batteries are designed to have minimal load and that's why the laptops put the CPUs into lower modes and such. When you draw too much power from them, they won't operate correctly in the long term. Additionally, laptops aren't nearly as fast when they're not plugged in. However, some times I want to run the Agent even when I am on battery. This feature makes the Agent thinks it is still plugged on.
4.Disable workunit timeout for slow computers. If your computer takes too long to finish a workunit, the Agent will sometimes abort it before it completes fully. Even though UD still gives you full points and credit for the partially finished workunit, it would be nice to be able to finish the workunit all the way. This feature is the newest part of my program, so it still may be a little buggy. Let me know if it works or doesn't for you.
由於我也是看得一知半解~~所以不要說出來誤解大家...
我從程式的註解所得知如下~~
1.允許抓多個任務存放，當無法順利連上UD Server時可以繼續RUN其它任務
2.多CPU支援~~對雙CPU(戓更多)及HT技術的CPU將是一大福音
3.取消UD自動偵測電源，將NB沒有接電源時不會RUN的限制取消(應該也包括UPS)
4.取消UD因電腦等級不夠所導致無法執行某些任務的限制~~(不確定)
下載點 
